Phone shows only Date and Time, and it is incorrect - Powered by Kayako SupportSuite Help Desk Software

March 18, 2009
Login

Support Center » Knowledgebase » Phone shows only Date and Time, and it is incorrect

	Phone shows only Date and Time, and it is incorrect

Article If you have a 480i model phone:

Issue:
** The phone does not work. The display of the 480i phone shows only the date and time.

Explanation:
There is a bug in the Aastra firmware that can cause the phone to lose the TFTP Server setting which is necessary for it to function. Below are instructions to re-enter the TFTP Server setting.

Resolution:
Press the following keys in order:
1. “Options” (A button near the top of the phone)
2. 9 (for network options)
(You are prompted for password, enter "22222")
3. “Enter” (This is a soft key on the screen.)
4. 7 (for TFTP Setting)
5. 1 (for primary TFTP)

The display will now show 3 dots (. . .) for the TFTP Server setting. It is supposed to show the TFTP Server’s IP address (206.80.91.130). To enter it, you need to do the following:

6. Use the right-arrow key which is directly under the display to move the cursor to the end of the three dots. Then use the backspace key (a soft key on the screen) to remove the three dots.
7. Now enter the IP address 206.80.91.130. After you type “206”, you must use the soft key labeled “dot” to enter the dot. Proceed to enter the entire IP address with dots in the appropriate places.
8. Once the screen shows 206.80.91.130, press the “done” soft key three times, and then press the “restart” soft key to re-start the phone with the new setting.

You are finished.

Article Details

Article ID:

Created On:

12 Sep 2009 6:10 PM